Step 3 of 4
Set up output
Output connects Vanta to your controller and your console or PC. Open the Output tab and follow just the one that matches your hardware.
| Your setup | Output connection |
|---|---|
| Console with Titan Two | Titan Two |
| PS5 or Xbox with MAKCU | MAKCU |
| PS5 with Vanta's built-in Remote Play | PS Remote Play |
| Xbox Series with XStreaming | Virtual Controller |
| NBA 2K on this PC (Steam) | Virtual Controller |
All output modes come with Vanta. Pick by hardware, not by script.
What happens when you start
- Starting the script connects PS Remote Play or the virtual controller on its own. There's no separate connect button.
- Steam and XStreaming need this order: start the Vanta script, wait for the virtual controller to show up under Virtual Output, then open Steam or XStreaming.
- In your game (or XStreaming's Gamepad menu), pick the Xbox 360 virtual controller.
Titan Two wiring
- Controller → Input-A, PC → PROG, Output → console or routing device. Use USB cables that carry data.
- Close GTuner IV, Helios and anything else using the Titan Two.
- Check Scripts On Device has Vanta Bridge and select its slot. Leave Output Protocol on Auto unless you use a P5General or P5Core (then PS5).
PS5 Remote Play
- Wake the PS5, turn on Remote Play, and connect PC and PS5 with wired ethernet on the same network.
- Use Refresh consoles. If your PS5 doesn't show, use Enter console IP.
- Pairing uses an 8-digit code, the console login PIN is 4 digits.
- Sound and mic start off. Turn them on under Output → Audio.
When the game picture and controller both work, move on to the script.
Stuck? Ask in #vision-support on our Discord. A real person answers.